Elevate Slim has been entirely developed by DigiFarm VBN with our RTK customers in mind. Elevate is the only modem on the market to integrate easy roof mounting with cloud based remote management. Elevate eliminates the need for painful firmware updates requiring your AMS professional to make a Farm visit. Digifarm automatically pushes out needed firmware without any impact to your farming operation.
Elevate Slim works with any brand of agriculture GPS receiver. Dealers have the ability to manage mount points remotely through DigiFarm’s portal. Within seconds your elevate Slim is ready to be paired with your receiver. DigiFarm sells all the custom cabling you need to use the receiver of your choice!
- Easy mag-mount roof installation
- Works with any brand of GPS receiver, including John Deere Star Fire and Integrated receivers.
- Over-the-air firmware updates
- Easily change receiver mount points
- No special cabling
- Easily move elevate from machine-to-machine
- Lowest cost modem on the market
- No data overages
- Eliminate cab clutter
Elevate Slim is supported by most major brands of receivers, including but not limited to:
- CASE Vector Pro
- John Deere Integrated
- Ag Leader 6500
- Ag Leader Paradyme
- Ag Leader GeoSteer
- Ag Leader 2500
- AGCO Trimble 382
- AGCO NovAtel Smart 6L
- John Deere SF3000 & SF6000
- Outback Rebel
- Outback Max
- Outback STX
- Outback S3 w/ A320 or A220
- Phoenix 300
- Raven 600S
- Raven RS1
- Raven Cruiser II w/ RTK
- Raven Envizio Pro & Envizio Pro II
- Raven Viper 4
- Trimble FmX-Case IH/New Holland FM100
- Trimble CFX-750-Case IH/New Holland FM-750
- Trimble-Case IH/New Holland 372
- Trimble GFX-750-Case IH/New Holland XCN-1050
- Trimble TMX-2050-Case IH/New Holland XCN-2050
- Trimble-Case IH/New Holland 262
- Trimble 252
- Trimble EZ-Guide 500
- Topcon AGI-3
- Topcon AGI-4
Specifications
Size: 5 inches x 7 inches (127.00mm x 177.8 mm)
Weight: 1 lbs 8 oz
Operating Temperature: -40 – 158F (-40 – 70 C)
Power at 12 VDC: 1.7W at 12 VDC
Input Voltage range: 12-24 VDC
Connector: 12 pin Deutsch
Environmental: IP67, when correct cables are connected
Data Interface
Two RS232 interfaces operating 12,000 to 115,000 bps
Native Deere radio emulation
Cellular
Carriers: AT&T, Verizon
Countries: United States and Canada (only Verizon in Canda with a roam any carrier plan)
Cellular Bands:
4G LTE-FDD: B2, B4, B5, B12, B13, B14, B66, B71
3G HSPA+: B2, B4, B5
Transmit Power:
4G: 23.0 dBm ± 0.5 dBm
3G: 23.5 dBm ± 0.5 dBm
Receive Sensitivity:
4G: -102.0 dBm (@ 5 MHz BW)
3G: -112.0 dBm (@ 5 MHz BW)
QUICK REFERENCE CARDS
- CASE Vector Pro QRC elevate SLIM
- TopCon X30 / AGCO C3000 / AGI4 QRC elevate SLIM
- Raven Viper 4/RS1 QRC elevate SLIM
- John Deere Integrated QRC elevate SLIM
- Trimble TMX QRC elevate SLIM
- ParaDyme/GeoSteer QRC elevate SLIM
- Trimble FMX QRC elevate SLIM
- Trimble FM750/CFX 750 QRC elevate SLIM
- AGCO NT01 elevate SLIM
- AGCO C1000/AGI4 elevate SLIM
- AgLeader 6500/7500 elevate SLIM
- AGCO NT03 QRC elevate SLIM
- Trimble 372/272 QRC elevate SLIM
Click the link to view cabling for your precision system:
elevate SLIM extension cable
elevate SLIM John Deere Integrated Receiver T-Cable
elevate SLIM John Deere SF3000/6000 T-Cable
elevate SLIM Metal stick-on Mounting Plate
elevate SLIM to CFX750/FM750
elevate SLIM to FMX/FM1000
elevate SLIM to Paradyme
elevate SLIM to Raven RS-1
elevate SLIM to Trimble 372
elevate SLIM to Vector Pro
elevate SLIM to Topcon AGI-4
elevate SLIM to Trimble Nav-900 (GFX-750)
elevate SLIM to AgCo Adapter
Beacon v4.0 is the next evolution of our very popular bluetooth corrections streaming device. Take all the benefits of DigiFarm’s Beacon v3.0 and add-in more functionality. Beacon v4.0 will work with any brand of RTK receiver and either mounts on the roof or in-cab. Once installed, the Beacon v4.0 can be paired with the NBV1 iOs streaming app. Simply a free download from the app store.
Integrated solution for John Deere Star Fire systems.
Takes over iPad location services making Beacon v4.0 perfect for use with any iOS mapping app!
- Integrated solution for John Deere Star Fire Systems
- NO smartcable required
- Takes over iPad location services
- Perfect for use with any iOS mapping app
- Use your existing cellular-enabled mobile device (iPad)
- No need to purchase expensive radios or base stations
- Cost effective
- Very fast installation
- Stream RTK through iPad using NBV1 app
- High-power Bluetooth device
- Ruggedized and weather resistant
- Reduces cab clutter by eliminating cables
The Beacon v4.0 is supported by most major brands of receivers, including but not limited to:
- CASE Vector Pro
- John Deere Integrated
- Ag Leader 6500
- Ag Leader Paradyme
- Ag Leader GeoSteer
- Ag Leader 2500
- AGCO Trimble 382
- AGCO NovAtel Smart 6L
- John Deere SF3000, SF6000, & SF7000
- Outback Rebel
- Outback Max
- Outback STX
- Outback S3 w/ A320 or A220
- Phoenix 300
- Raven 600S
- Raven RS1
- Raven Cruiser II w/ RTK
- Raven Envizio Pro & Envizio Pro II
- Raven Viper 4
- Trimble FmX-Case IH/New Holland FM100
- Trimble CFX-750-Case IH/New Holland FM-750
- Trimble-Case IH/New Holland 372
- Trimble GFX-750-Case IH/New Holland XCN-1050
- Trimble TMX-2050-Case IH/New Holland XCN-2050
- Trimble-Case IH/New Holland 262
- Trimble 252
- Trimble EZ-Guide 500
- Topcon AGI-3
- Topcon AGI-4
Made for iPhone 10 and newer, cellular enabled iPads including iPad 4 and newer, iPad Mini & newer, iPad Air & newer. “Made for iPhone” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPhone or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPhone or iPad may affect wireless performance. iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. iPad Air and iPad mini are trademarks of Apple Inc.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
Click to view your precision systems cabling:
Beacon 3.0 to Beacon 4.0
Beacon 4.0 to AgCo
Beacon 4.0 to AGI-4
Beacon 4.0 to Generic DB9 Male
Beacon 4.0 to Geosteer/6500/Paradyme
Beacon 4.0 to John Deere SF3000/6000/Integrated
Beacon 4.0 to Paradyme
Beacon 4.0 to Raven RS-1
Beacon 4.0 to Trimble 372
Beacon 4.0 to Trimble FMX/CNH FM-1000
Beacon 4.0 to Trimble GFX-750/XCN-1050 (NAV-900)
Beacon 4.0 to Trimble/CNH 750
Beacon 4.0 to Vector Pro
The BR1 Mini Modem is a WiFi-only modem that supports all precision ag companies who are bringing WiFi enabled displays to the market. This new modem will work with any display that utilizes a WiFi network, including Ag Leader InCommand, Trimble Android displays, the Outback MAX and the Outback Rebel.
The BR1 Mini Modem is a WiFi-only modem that supports all precision ag companies who are bringing WiFi enabled displays to the market. This new modem will work with any display that utilizes a WiFi network, including Ag Leader InCommand, Trimble Android displays, the Outback MAX and the Outback Rebel.
The BR1 Mini is a LTE modem that will also fall back to 3G and 1X service, ensuring the very best reliable performance in the most remote areas where RTK service is required. The BR1 Mini supports Verizon, US Cellular and AT&T.
The BR1 Mini ships with a high gain (double shot glass) antenna to help in weak cellular areas.
- WiFi-only modem
- LTE modem with 3G/1X fallback
- Low cost WiFi solution
- Perfect for new AgLeader, Trimble and Outback displays
- Ships with high gain roof antenna
- Ethernet and WiFi Only
- Supports most cellular carriers worldwide
Click to view kits for your precision system: